Skip to Content

Feed aggregator

Gildemeister nef 500 plus manuals

Recent forum posts - Sun, 08/05/2018 - 01:25
Hello,

maybe somobody have and could share manuals for Gildemeister nef 500 plus lathe machine with grundig manual plus control system.


How does a 70% reduction in wire edm operation costs sound to you?

Recent forum posts - Fri, 08/03/2018 - 01:22
[h=2]The price of a wire EDM machine is nothing compared to the cost of wire over the life of the machine.

Cad cam

Recent forum posts - Wed, 08/01/2018 - 20:52
Sorry I can't undestand you question.
Can you give me more context please?

Need a Fanuc O-T series manual

Recent forum posts - Wed, 08/01/2018 - 20:47
Hi how are you?
My name is Juan and I need your help, I have a CNC Lathe IKEGAI TC 15 and have an OT fanuc control.
I'm having problems to set the tool offset I can't reference the machine, this control don't have work shift.

Can you help me with tooloffset setting procedure please? or if you have the operators manual, I'm searching the manual but I can't find them I only found a Fanuc OT training of mechatropia but the offset setting no works to me.

Thank you so much for any suggestion.

Biesse Rover 322

Recent forum posts - Wed, 08/01/2018 - 18:59
Hi All
I have just got a Biesse Rover 322 and i am have trouble preforming the Global Homing, it comes up with Drive Signal not ok on the Z and Y axis, this is the first cnc I've owned so don't know much about them, any Ideas??

Amada Vipros 255 - Missing Data in ' Tooling Data Edit ' page of PHNC setting

Recent forum posts - Wed, 08/01/2018 - 02:56
Hi everyone,
Good afternoon,
My name is Mr. AUNG MYO KHANT. I am an Assistant General Manager in Multi Power Engineering Co.,Ltd. which located in Myanmar. We are manufacturing industrial switch boards which included sheet metal fabrication process. Now my turret punch machine, Amada Vipros 255 (2003) has got a problem. At first, Nearly almost of all parameters were missed and we put back already but some data in ' Tooling Data Edit ' page which was under PHNC setting menu were missing now. So please, can somebody help me to put back those data?
Kindly check 3 attached photos.
Thanks. Attached Images

write protect in macro input

Recent forum posts - Wed, 08/01/2018 - 00:11
I want to replace [ROUGH ST] as [ STRAIGHT] for 501 which is in box screen. even i want to edit comments for 501 which is displayed for operator to understand

Brother TC-228

Recent forum posts - Tue, 07/31/2018 - 21:52
Is there a parts counter on this particular model, if so can anyone walkthrough what controls to get there?

write protect in macro input

Recent forum posts - Fri, 07/27/2018 - 03:49
I want to edit macro variable input during write protect key is in OFF condition or removed from Fanuc Oi-TF model panel

Biesse Machines

Recent forum posts - Thu, 07/26/2018 - 21:34
yes mate, what king of help you need, let me know

HACO Bending Machine Troubleshooting and Repair

Recent forum posts - Thu, 07/26/2018 - 02:51
Hello!
Maybe someone can help me with "Haco" bending machine.
I have same problem with monitor. Missing signal from PC.
When I turn on screen stay only "video"
I am not expert about this type of machines.
I can sent same more pictures.
Please help!!

CNC Machined Parts

Recent forum posts - Wed, 07/25/2018 - 05:35
To assure the quality of the raw materials, you need to work with an experienced and trustable service provider who can provide material certificates and comprehensive testing.

Hi from Mike @teknika4

Recent forum posts - Wed, 07/25/2018 - 04:51
Hi, I am Mike from Teknika4 I just joined up on the forum and happy to find many interesting things here.

wanted - software for axyz router

Recent forum posts - Wed, 07/18/2018 - 09:31
we need toolpath 2.9.0.6 and axyz dnc 1.0, our own cd was damaged and is unreadable, can anyone help?
thanks, Peter

VMC Hitachi Seiki VA 35 - Not rolling spindle

Recent forum posts - Tue, 07/17/2018 - 13:59
After starting the machine and passing through reference points, the MDI does not execute command M 03 / M 04 / (which mean rolling respectively clockwise and counterclockwise) and M 19 / spindle orientation /. Also, the tool holder, which is situated in the spindle, can not be unlocked even though the hydraulic system works.
Otherwise, the movements on the XYZ axes in the same MDI mode are executed.
The management system is Fanuc 6M-B
Year of production: 1986
If someone has had a similar problem, please cooperate!

Castek SDNC16P-50 EDM Drill

Recent forum posts - Tue, 07/17/2018 - 06:34
I have been having a problem with the control locking up even while the machine is just setting there doing nothing. When the machine is burning a hole and the control locks up, the machine will continue burning and has to be shut down to stop it. Is there anyone out there that knows anything about this machine?

Toyoda FA450 TSC upgrade

Recent forum posts - Fri, 07/13/2018 - 14:05
I am looking at buying a Toyoda FA450 with a 15M and 300 psi TSC.
I need 1000 PSI TSC. Does anyone know what I am going to need besides a new pump, filters and lines?
I realize that I may also have to modify the ladder to accomidate spindle purge and possibly other items.
My main concern is if the machine hardware can take the pressure, as is?

Thanks for the help in advance!

HELP!!! euro spindle runs in jog but oscillates for/rev when trying M-code Command

Recent forum posts - Thu, 07/12/2018 - 10:08
hello Everyone,

im currently trying to get a Northwood 125 CNC router up and running again. it is ran on GE Fanuc Basic Operation package 1 software and a Saftronics VG5 AC Drive. i got the spindle to run in jog mode off the drives external remote but once i try to run off the main control screen with a m-code or program the spindle just oscillates back and fourth. im getting good meter readings and proper voltage off motor leads while it is running in jog but once i try to turn on motor with m-code it is only sending out around 10 volts to the spindle motor. it would not run at all when i first started to fix the machine and i got it running by changing some of the settings on the drives external remote, now it runs perfect in jog. i was thinking it could just be more setting (parameter) problems but not 100% sure. any info or help on this would be greatly appreciated. thanks in advance

Best wheel for finishing A36 hot rolled steel

Recent forum posts - Wed, 07/11/2018 - 03:01
My new surface grinder is headed my way shortly. One of my first undertakings after set up is to complete a base for a model motor. The base is done yet I might want to get as great a surface complete as feasible for appearance purpose. Any suggestions for a wheel will be valued. I wouldn't fret spending a minimal expenditure to get a decent wheel. I as of now have a Norton 5SG 46 J on arranging for my essential wheel, was figuring something a little better coarseness would be useful for conclusive completing in milder steels.

How to vector an image of a piece?

Recent forum posts - Tue, 07/10/2018 - 12:09
So I am working on replicating the contour of a piece of a loudspeaker so I can fit it into the wood it must me placed, but the shape is kind of complex and even if I can just aproximate an then do the details by hand I would like to know if it is possible to do something like draw the contour on a white sheet, take an image, and put some vector file from that image on a sofware like AutoCAD and then to the CNC control sofware. I am aware of your comments, thanks in advance.
Syndicate content