Skip to Content

Feed aggregator

CRUSADER 2 l

Recent forum posts - Wed, 03/28/2018 - 06:32
Hi,
I have a CRUSADER 2L controller fitted on my Lathe.
I had moth balled it for a couple of years .
I tried starting it today.
But the Controller flashes an error code 12 .
As per the manual it says " Software limit reached "
What does this mean. I am unable to counter it .
If any one can help . I would be highly obliged.
Ajay

Syntec MOT 009 alarm

Recent forum posts - Wed, 03/28/2018 - 02:19
A friend bought a Eagle KM100 milling machine with a Syntec control, the machine had been not in use for more than 4 years, now after it has been connected it has 4 alarms of which the last 3 are for zero returning the axis to home position and that's not a problem but the 1st one MOT 009 y axis Servo driver alarm, what could be problem and can it be cleared?

Mori Mapps PCMCIA(compact flash) format to reload Mapps unit

Recent forum posts - Tue, 03/27/2018 - 21:30
[QUOTE=Petro;2431]Hi Chap,

Wow thanks for the info! Never thought I would find anyone that would have taken on this project themselves to accomplished this. From what I heard, someone said that Mapps1 is formatted different then Mapps II/III as you have said as well as the file directory content/structure from what I remember. Mapps I is one folder with the version number and MappsII/III has many folders. I also noticed that as well about the fixed verses removable disk. I actually just purchased a compact flash to IDE adapter yesterday and waiting delivery to try to format it like a hard fixed disk so it does not show up as a removable disk. Not sure if this will work, but I was going to try it. Then my thought was to try a ghost image on a mapps card and image it to another to duplicate the format which it sounds like you did something similar. Think this would work to make it fixed disk? However its only a Mapps-I card I still need to find a Mapps II and III card to do the same if it works.

One thing I noticed in the backup files from a formatted MappII or Mapps III (don

Syntec MOT 009 y axis servo alarm

Recent forum posts - Tue, 03/27/2018 - 15:52
A friend bought a Eagle KM100 milling machine with a Syntec control, the machine had been not in use for more than 4 years, now after it has been connected it has 4 alarms of which the last 3 are for zero returning the axis to home position and that's not a problem but the 1st one MOT 009 y axis Servo driver alarm, what could be problem and can it be cleared?

Mikron problem HELP

Recent forum posts - Tue, 03/27/2018 - 05:27
Hello,

My name is Ricardo, I work for a company called fvfmilling in Portugal,
we have a Mikron vcp 710 3 axes.

when we start the machine at the beginning of the day, and let's read the origins, she sends a kick and gives the error that I send in the attached photo.

Can you tell me what it might be?

thank you so much

image1.jpeg Best Regards

Ricardo Franco Attached Images

Replacing CNC Controller

Recent forum posts - Mon, 03/26/2018 - 06:06
Hi,
Does a Heidenhain TNC 360C has the ability to be replaced by a FIDIA F1.0190 Controller?

Help in setting up a robot / router

Recent forum posts - Sat, 03/24/2018 - 03:58
HELP IN SETTING UP A ROBOT / ROUTER




Hello everyone,


I am new to this forum and CNC world.


I have a small scale parts factory and we make custom body parts for automobiles. I am always looking out to make products precise and better quality.


I am looking for suggestions on making an all-purpose robot (since I can not afford separate robots and we will not be using it regularly) which can fit a waterjet cutting head to cut 4mm fiberglass parts and metal, laser cutting head to cut 2-3mm MS/SS/aluminum sheets, tig welding torch (not necessary), milling tool for wooden/foam patterns and 3D printing in plastic for patterns with work area approximately 1 cubic meter or more. If everything is not possible or proves to be very expensive, only milling and laser cutting heads will be ok for me as these will be used regularly.


Or if I can do this with a CNC router, let me know what will be the best options for me. 5 Axis minimum is required for my products.


What will be the total setup cost if I go with used / new machinery? Router / Robot.


Please let me know which will be the most economical robot for our purpose and head attachments for different work mentioned above. Where can I find used machines and used heads? What do I need to check for before buying a robot? What all comes with the machine?


I can find a CNC operator here in India who can operate the machine.


I'd be very grateful for any suggestions and help.


Looking forward for reply.


Thank you and Best Wishes from India

Help in setting up a robot / router

Recent forum posts - Sat, 03/24/2018 - 03:56
HELP IN SETTING UP A ROBOT / ROUTER




Hello everyone,


I am new to this forum and CNC world.


I have a small scale parts factory and we make custom body parts for automobiles. I am always looking out to make products precise and better quality.


I am looking for suggestions on making an all-purpose robot (since I can not afford separate robots and we will not be using it regularly) which can fit a waterjet cutting head to cut 4mm fiberglass parts and metal, laser cutting head to cut 2-3mm MS/SS/aluminum sheets, tig welding torch (not necessary), milling tool for wooden/foam patterns and 3D printing in plastic for patterns with work area approximately 1 cubic meter or more. If everything is not possible or proves to be very expensive, only milling and laser cutting heads will be ok for me as these will be used regularly.


Or if I can do this with a CNC router, let me know what will be the best options for me. 5 Axis minimum is required for my products.


What will be the total setup cost if I go with used / new machinery? Router / Robot.


Please let me know which will be the most economical robot for our purpose and head attachments for different work mentioned above. Where can I find used machines and used heads? What do I need to check for before buying a robot? What all comes with the machine?


I can find a CNC operator here in India who can operate the machine.


I'd be very grateful for any suggestions and help.


Looking forward for reply.


Thank you and Best Wishes from India

Help in setting up a robot / router

Recent forum posts - Sat, 03/24/2018 - 03:56
HELP IN SETTING UP A ROBOT / ROUTER




Hello everyone,


I am new to this forum and CNC world.


I have a small scale parts factory and we make custom body parts for automobiles. I am always looking out to make products precise and better quality.


I am looking for suggestions on making an all-purpose robot (since I can not afford separate robots and we will not be using it regularly) which can fit a waterjet cutting head to cut 4mm fiberglass parts and metal, laser cutting head to cut 2-3mm MS/SS/aluminum sheets, tig welding torch (not necessary), milling tool for wooden/foam patterns and 3D printing in plastic for patterns with work area approximately 1 cubic meter or more. If everything is not possible or proves to be very expensive, only milling and laser cutting heads will be ok for me as these will be used regularly.


Or if I can do this with a CNC router, let me know what will be the best options for me. 5 Axis minimum is required for my products.


What will be the total setup cost if I go with used / new machinery? Router / Robot.


Please let me know which will be the most economical robot for our purpose and head attachments for different work mentioned above. Where can I find used machines and used heads? What do I need to check for before buying a robot? What all comes with the machine?


I can find a CNC operator here in India who can operate the machine.


I'd be very grateful for any suggestions and help.


Looking forward for reply.


Thank you and Best Wishes from India

Machine stuck in Loading Loader on control panel

Recent forum posts - Fri, 03/23/2018 - 18:17
Machine will not engage or turn on and cycle through the normal start up. It is a Multicam 3000 and it is stuck saying "loading Loader" trying to get ahold of multicam tech or someone that can trouble shoot this for me in Orange County CA. Any references or assistance would be much appreciated.

Tyler Curtis
Stanco Signage
714-549-9303

Magnatek spindle drive, no power to logic board

Recent forum posts - Wed, 03/21/2018 - 01:25
Quote: Originally Posted by Sinumeriko Hope this helps, if you need the complete 56-page manual, please let me know, it's free. By any chance does anyone have a copy of this manual? Much appreciated if someone reposts it. You can email me is your wish,

Thanks,

Doug

1019 atc alarm on akeira seiki sv 1100

Recent forum posts - Sat, 03/17/2018 - 04:41
Hello,

I have an alarm : 1019 ATC ALARM ON AKEIRA SEIKI SV 1100 , YEAR 1996

Does anyone know how to fix the above alarm?

Thanks

Test Old Serv

Recent forum posts - Fri, 03/16/2018 - 15:31
This is a test message as we are moving servers. Now NEW Server

Need help with old hitachi mori seiki mill va40 fanuc cotrol 6m... Please

Recent forum posts - Fri, 03/16/2018 - 14:45
My now machine stops between program but the green light of start program button still on (it should be off when the machine stops running). i tried very simple program and it still didn't work.
( like: G40 G49 G80;
G50 G90 G00 X0. Y0. S2000;
G44 H1 Z2.0 M03; MACHINE IS STOPPED RIGHT HERE
Z0.;
G01 ..... )

I turned on the lock machine switch on the control and ran the program without running table and spindle, everything was ok. But when tried to run the machine with lock machine switch off it stopped between the program again.

please help me. Any idea always is helpful to me right now.

5-axis CNC Machining

Recent forum posts - Fri, 03/16/2018 - 03:00
Share your views and benefits of using 5-axis CNC machining.

Optimize parameters for mills with tips

Recent forum posts - Tue, 03/13/2018 - 07:46
Hi wdallen,

Thank you for wonderful information.

Closed Loop Stepper Compared with Open Loop Stepper

Recent forum posts - Tue, 03/13/2018 - 07:43
Thank you, Friends, to share information about loop stepper.

212 illegal plane select in Nakamura tome sc250 with fanuc 21i t control

Recent forum posts - Mon, 03/12/2018 - 09:22
I am using Nakamura tome Sc 250 with fanuc 21i-T control. It is showing 212 illegal plane select alarm when we give g71 and g72 cycles even though the given programme is correct. Please help out to overcome this problem.
I need manuals also for this machine

Double side surface grinding machines on sale

Recent forum posts - Sun, 03/04/2018 - 22:07
KSHS Double side surface grinding machines, DSG-700 (most popular), DSG-800/840(Customized), DSG-1000 (popular), DSG-1200(Customized) on sale.
Max. work piece size up to 350mm, best grinding precision 1 um.

Can be used for metal, glass, ceramics, plastics, and semi-conductor grinding.
Flat surface grinding CNC machines, for materials:
Tungsten Carbide, Sinter Metal, Hard Metal, Bronze, Aluminum, Quartz, Crystal, Sapphire, Optical Glass, MLCC, Ceramic Substrate, Zirconium, Engineering Plastics, Composite, NTC Substrate, PZT Substrate, Diamond dicing Blade, Ferrite, Silicon, Silicon Carbide, etc.

Anyone has such need pls just contact me, Sherry. KSHS has own factory and technical department to produce machine well fit your requests.

Looking forward to cooperating with you!

Best regards,
Sherry Attached Images

CNC Lathe Machines

Recent forum posts - Wed, 02/28/2018 - 02:44
A lathe machine is typically used for shaping the material into the desired form by removing the excess material from a given workpiece (generally cylindrical). Apart from serving as cutting and facing machine, a lathe is also used to perform complex operations such as knurling, deformation, metal spinning, woodturning, thermal spraying, metalworking and more.

Read more: https://hubpages.com/technology/All-...Lathe-Machines
Syndicate content